+- Alarmanlagen-Forum - Alarmforum - Fachforum für Sicherheitstechnik (https://www.alarmforum.de)
+-- Forum: Einbruchmeldesysteme nach Hersteller (/forumdisplay.php?fid=97)
+--- Forum: wenn es nicht passt / andere Hersteller (/forumdisplay.php?fid=89)
+--- Thema: Scantronic R7500 cannot detect PIR 714R? (/showthread.php?tid=4561)
Scantronic R7500 cannot detect PIR 714R? - RoarSlot - 27-07-2014 09:53
Hi,
My Scantronic R7500 cannot detect my three Pir 714R sensors?
[attachment=906]
Jamming is set to off.
The batteries are new.
I activate the sabotage function by opening the lid of the sensor
I have also tried pushing the tamper/sabotage button
[attachment=907]
What can be the issue.
You can answer in German also :-)
RE: Scantronic R7500 cannot detect PIR 714R? - megagramm - 27-07-2014 10:27
Hi Roarslot,
if the former Batterie longer was empty, you may put off the new battery and connect the + and - from your PIR with a wire or another metall.
Then try it again.
best regards
megagramm
RE: Scantronic R7500 cannot detect PIR 714R? - RoarSlot - 28-07-2014 19:19
Hi megagramm,
Thank you for your answer.
I tried to short circuit the plus and minus in the PIR sensors, but no luck.
Best Regards
Roar Slot
RE: Scantronic R7500 cannot detect PIR 714R? - megagramm - 28-07-2014 21:23
Hi,
wenn you put the new battery in, ist the red LED blinking?
try to push the sabotage button for a few seconds an several times.
best regards
megagramm
RE: Scantronic R7500 cannot detect PIR 714R? - RoarSlot - 02-08-2014 09:06
Hi,
Yes, led is blinking red. But the R7500 does not detect them, still.
I have tried pushing the sabotage button several time for all three sensors, but no luck.
Best Regards
Roar Slot
RE: Scantronic R7500 cannot detect PIR 714R? - megagramm - 02-08-2014 12:46
Hi,
try to delete the PIR on your R7500 completly.
Then try again to learn it on your R7500.
best regards
megagramm
RE: Scantronic R7500 cannot detect PIR 714R? - RoarSlot - 03-08-2014 06:04
Hi,
That I did from the beginning.
Best Regards
Roar Slot