Antwort schreiben 
 
Themabewertung:
  • 0 Bewertungen - 0 im Durchschnitt
  • 1
  • 2
  • 3
  • 4
  • 5
Terxon MX 8-Zone Wireless Extension
30-06-2019, 11:31
Beitrag: #1
Terxon MX 8-Zone Wireless Extension
Hello All

I have an interesting problem.

I have MX setup with two extensions Wired and Wireless.
They work well and no issues with fitting or setting them up.

About 3years ago i added two FU8305 wireless panic buttons.
The setup was very easy and the wireless range was very good, so no issues.

I ran a test on the buttons over 4 months ago, and the Alarm Unit returned an error.

TELECMD LOW BATT, and the keypad showed a RED light.

I cannot CLEAR the error.
Is there any way to CLEAR the error without replacing the panic buttons?

(I have tried and failed to replace the batteries in the panic button) I have removed the panic buttons by de-paring them off the system.

The Alarm unit is OK, I can still ARM and DISARM However I always see the error and the red light on the keypad.

There are NO other issues with the setup, no other error events in the logs.

Any advice?
Alle Beiträge dieses Benutzers finden
Diese Nachricht in einer Antwort zitieren
14-09-2019, 12:23
Beitrag: #2
RE: Terxon MX 8-Zone Wireless Extension
All.. I have reset the TELECMD LOW BATT fault. Here is what i have learnt.

1. The downloader software will NOT reset these types of faults
2. Disconnecting (removing the from setup/memory) the wifi devices i.e FU805 from the wifi extension unit will NOT work.

It seems the wifi extension continues to send the last fault to the control panel. So I disconnected the extension unit from the system, the control panel returned another fault (Extension 2 missing). I had to reconnect the extension and that cleared both faults.

Good news i no longer see the RED fault LED on the keypads.

(I guess one question : i dont recall a configuration setting for the number of extension units so why did the control panel see the missing extension (i only disconnected the power from that unit) I suspect its the wiring method as I was unable to reset that fault. Hence i had to reconnect the extension unit before it cleared)?!? Any thoughts?
Alle Beiträge dieses Benutzers finden
Diese Nachricht in einer Antwort zitieren
14-09-2019, 17:29
Beitrag: #3
RE: Terxon MX 8-Zone Wireless Extension
Hi
I can't answer your question but thanks for giving that Feedback to us.
Regards
Sektionschef

Abus Terxon SX+SG1800+BW8010+Monacour AS362
Jablotron Oasis80(JA-84)+JA-83M+JA-83P+JA-80PB+JA-81F+JA-80L
Instar IN-5907HD
Alle Beiträge dieses Benutzers finden
Diese Nachricht in einer Antwort zitieren
Antwort schreiben 


Möglicherweise verwandte Themen...
Thema: Verfasser Antworten: Ansichten: Letzter Beitrag
  Terxon LX - Anzeige der auslösenden Zone Wombats 9 771 08-12-2023 21:32
Letzter Beitrag: Donald
  Zone für alle Bereiche, A, B, C, D, auf NV stellen Delago17 2 1.317 01-03-2023 09:09
Letzter Beitrag: Delago17
  Zone Sab auf alle gruppen vanturenhout 29 5.507 25-12-2022 12:44
Letzter Beitrag: ssb-security
  terxon mx gehtest: zone schlägt nicht an tombalabomba 15 3.754 03-09-2021 18:48
Letzter Beitrag: Martina H.
  Terxon S zone 4 offen Ohk1985 14 5.100 17-07-2021 09:00
Letzter Beitrag: AaronK
  Fehlalarme in einer einzigen Zone Terxon M Vogels 27 6.876 26-11-2020 12:50
Letzter Beitrag: Berggeist
  Terxon MX - Benutzer Rechte nur für seine Zone Westice 23 9.886 30-03-2020 08:03
Letzter Beitrag: funkistnichtalles
smile Terxon LX per App steuern. Wie schaltet die Zone? Terxonsebas 22 10.486 25-09-2019 12:40
Letzter Beitrag: Terxonsebas
  Terxon S Zone C aktivieren - wie? trybear 8 5.385 06-05-2019 08:16
Letzter Beitrag: Sektionschef
  Terxon MX Fehlalarm Zone Dennyoo 7 4.588 17-03-2019 19:33
Letzter Beitrag: Sektionschef



Benutzer, die gerade dieses Thema anschauen: 1 Gast/Gäste