JA-100 SMS-Steuerung

[beat]

SMS commands

The system can be controlled or its status queried with SMS commands. SMS commands can be used to control the setting statuses of individual sections (setting, unsetting) and PG outputs, or just query about the statuses of individual sections or other statuses of the whole system. The texts of command used to control PG outputs are editable, the other texts cannot be changed.

Command structure: m*nnnn_command, where m is the sequential number of the user code; * is a separator (m* is only necessary if a code with a prefix is used); nnnn is a 4-digit user code; _ is a separating gap; command is the execution command.

A query command for information about the system status can also be obtained with the use of the following commands

DINFO, STATUS, COM and GSM (the texts of the commands cannot be changed).

A control command for the control of setting of the system as a whole or just its individual sections can be generated with the use of the following commands

SET, UNSET, or SET x x x, UNSET x x x, where x are numbers of sections (the texts of the commands cannot be changed).

The control commands for the control of PG outputs are not pre-set by the manufacturer and if necessary, they must be set.



Control command and authorization


Answer (specimen)


Note

DINFO

(basic information
about the installation)



Authorization:

Service, Administrator


JABLOTRON 100:

TYPE: JA-101K,

SN: 14004026532523,

SW: LJ60410,

HW: LJ16107,

RC: C5U6G-215CP-D2A6,

GSM: 90%, GPRS: Ok,

LAN: off

Time 17:01 22.7.


Installation name in accordance with the Initial setup tab

Control panel type

Serial number

Firmware version

Hardware version

Registration code of GSM communicator

GSM signal quality, GPRS data availability

LAN connection status (Ok or off)

Time and date of handing over the SMS to the GSM network

STATUS

(status of sections)



Authorization:

Service, Administrator, User.

If the user only has access
to some sections, the status of the sections that are accessible for him/her will be returned.


JABLOTRON 100:

Status:

Section 1: Unset;

Section 2: Set;

Section 3: Unset;

Section 4: Set, Error;

Section 5: Set;

Section 6: Set;

Section 7: Unset;

Section 8: Unset;


GSM: 90%;

Time 17:01 22.7.




Installation name in accordance with the Initial setup tab

Status:
Name and status of Section 1

Name and status of Section 2

Name and status of Section 3

Name and status of Section 4

Name and status of Section 5

Name and status of Section 6

Name and status of Section 7

Name and status of Section 8


GSM signal quality

Time and date of handing over the SMS to the GSM network

COM

(info about communication)



Authorization:

Service


JABLOTRON 100:

GSM: 90%,GPRS: ok,

CELLID: 44905, OPID: 23003,

LAN: ok, MAC: hh:hh:hh:hh:hh:hh,

PSTN: off,

ARC: 1:ok, 2:ok, 3:off, 4:ok, 5:off,

Time 17:01 22.7.




Installation name in accordance with the Initial setup tab

GSM signal quality, GPRS data availability

Number of the cell and operator providing the GSM connection

LAN connection status and MAC address

Connection status of the phone line (possible with JA-190X)

Activation status of transmissions to individual possible ARC’s

Time and date of handing over the SMS to the GSM network

GSM

(restart GSM)



Authorization:

Service, Administrator, User


JABLOTRON 100:

SMS processed OK: GSM;

Time 17:01 22.7.




Installation name in accordance with the Initial setup tab

Confirmation of SMS delivery (before restart)

Time and date of handing over the SMS to the GSM network









Control command and authorization


Answer (specimen)


Note

SET

(control of the whole system)



Authorization:

All


JABLOTRON 100:

Status:

Section 1: Set;

Section 2: Set;

Section 3: Set;

Section 4: Set, Error;

Section 5: Set;

Section 6: Set;

Section 7: Set with an active peripheral,

Section 8: Set with an active peripheral;

GSM: 90%;

Time 17:01 22.7.


Installation name in accordance with the Initial setup tab

Status:
Name and status of Section 1

Name and status of Section 2

Name and status of Section 3

Name and status of Section 4

Name and status of Section 5

Name and status of Section 6

Name and status of Section 7

Name and status of Section 8


GSM signal quality

Time and date of handing over the SMS to the GSM network


UNSET

(control of the whole system)



Authorization:

All


JABLOTRON 100:

Status:

Section 1: Unset;

Section 2: Unset;

Section 3: Unset;

Section 4: Unset, Error;

Section 5: Unset;

Section 6: Unset;

Section 7: Unset;

Section 8: Unset;

GSM: 90%;

Time 17:01 22.7.


Installation name in accordance with the Initial setup tab

Status:
Name and status of Section 1

Name and status of Section 2

Name and status of Section 3

Name and status of Section 4

Name and status of Section 5

Name and status of Section 6

Name and status of Section 7

Name and status of Section 8

GSM signal quality

Time and date of handing over the SMS to the GSM network


SET 1 3 5 7

(control of selected system sections)



Authorization:

All


JABLOTRON 100:

Status:

Section 1: Set;

Section 3: Set;

Section 5: Set;

Section 7: Set with an active peripheral,

GSM: 90%;

Time 17:01 22.7.


Installation name in accordance with the Initial setup tab

Status:
Name and status of Section 1

Name and status of Section 3

Name and status of Section 5

Name and status of Section 7

GSM signal quality

Time and date of handing over the SMS to GSM


UNSET 2 4 6 8

(control of selected system sections)

Authorization:

All


JABLOTRON 100:

Status:

Section 2: Unset;

Section 4: Unset;

GSM: 90%;

Time 17:01 22.7.


Installation name in accordance with the Initial setup tab

Status:
Name and status of Section 2

Name and status of Section 4

GSM signal quality

Time and date of handing over the SMS to GSM